-40%
1 Tube Evercoat 410 Glaze It Finishing Putty 24 oz Tube W/HARDENER

1 Tube Evercoat 410 Glaze It Finishing Putty 24 oz Tube W/HARDENER

$ 19.98

Availability: 53 in stock
  • Refund will be given as: Money Back
  • Returns Accepted: Returns Accepted
  • Manufacturer Part Number: 410
  • Return shipping will be paid by: Buyer
  • Condition: New
  • Item must be returned within: 14 Days
  • Part Brand: EVERCOAT
  • Size: 24oz.
  • Brand: EVERCOAT

    Description

    GLAZE IT FINISHING PUTTY 24 FL OZ TUBE
    GLAZE-IT® is a two-part, flowable, polyester finishing putty ideally suited for filling and skim coating body work, pinholes, grind marks, low spots and other surface imperfections. Use as a finish coat over body filler repair areas to fill minor defects, deep sand scratches and pinholes prior to applying primer surfacer to improve the efficiency of the primer coat. Can also be used to fill minor body damage up to 1/8” in depth.
    APPROVED SUBSTRATES
    Steel, Galvanized and other zinc-coated steel, and most rigid to semi-rigid fiberglass and thermoset plastics. For flexible plastics, use POLY-FLEX™ Flexible Polyester Glazing Putty.
    PREPARATION
    Clean surface. Remove all dirt, oil grease and wax. Use an 80—180 grit disc to remove or scuff paint. Surface must be completely dry before application.
    MIXING
    Place desired amount of putty on a clean, non-fibrous mixing board. Add a ribbon of cream hardener from edge to edge across the center of dispensed putty. Puddles larger than 4” in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 5-6 minutes @ 75 to 80F