7x Liqui Moly Wax Underbody Coating Anthracite Black 1L

Description

Autocarparts-24
Item number:
6223971
Item number:
6223971
scope of delivery
7x Liqui Moly wax underbody protection anthracite / black tin 1 l
description
colour
anthracite / black
Container type
Can
content
1 l
description
Wax underbody protection is a solvent-based, bitumen-free coating material as a corrosion protection agent for vehicle underbody for the repair and post-treatment of all protective coverings. After drying, the waxes and resins contained therein form a closed protective film with excellent adhesion and corrosion protection properties. Due to its good stability, the material can be applied in a layer thickness of up to 1 mm.
application
The surfaces to be treated with wax underbody protection must be cleaned well beforehand. Remove rust. The surfaces must be dry, free of dirt, grease and largely dust. Wax underbody protection can be applied with the pressure cup gun, item no. 6220 or UBS spray gun, item no. 6219 with an operating pressure of 2 - 8 bar, depending on the desired spray pattern. Due to its good stability, the material can be used in a layer thickness of up to approx. 1 mm can be applied. The processing temperature and the surface temperature to be treated should not be below 10 ° C. Depending on the layer thickness and weather conditions, the vehicle is ready after approx. Ready to drive again for 2 hours. The final drying takes approx. 12 - 24 hours
Manufacturer
Liqui Moly
operation area
Wax underbody protection is mainly used on vehicle underbodies, fenders and wheelhouses after repairs, to care for PVC underbodies and to repair damage to the underbody.
properties
easy processing
fast drying
closed film with thin layer thickness
for repair and post-treatment
excellent stability
Note
Do not spray wax underbody protection on moving and heat-stressed parts such as joints, engines, gears, cardan shafts, exhausts, catalytic converters and brake systems! A blocked pistol can cause the can to burst! The operating instructions for the pistol must be observed! Gun after use with cleaner and thinner item no. 6130 clean!
Danger
Repeated contact can lead to rough or cracked skin.
Flammable liquid and vapor.
May cause drowsiness and dizziness.
If medical advice is needed, have container or label ready.
Keep out of the reach of children.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
Take measures against electrostatic discharges.
Use only outdoors or in a well-ventilated area.
Wear protective gloves / protective clothing / eye protection / face protection.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Wash skin [or shower] with water.
Keep in a well-ventilated place. Keep container tightly closed.
Store locked up.
Contents / container ... respectively.
Original part numbers (OE no.) Are used as reference numbers for comparison purposes and may differ
All logos, brand names and trademarks used are the property of their owners
All products are quality checked
Usually everything is in stock - so no waiting times
1 month right of withdrawal
24 months warranty on new goods
12 months warranty on used goods
Invoice incl. statutory VAT
No chargeable hotline, calls at the local rate
Our service does for you not to sell the goods
Wax underbody protection is a solvent-based, bitumen-free coating material as a corrosion protection agent for vehicle underbody for the repair and post-treatment of all protective coverings. After drying, the waxes and resins contained therein form a closed protective film with excellent adhesion and corrosion protection properties. Due to its good stability, the material can be applied in a layer thickness of up to 1 mm. The surfaces to be treated with wax underbody protection must be cleaned well beforehand. Remove rust. The surfaces must be dry, free of dirt, grease and largely dust. Wax underbody protection can be applied with the pressure cup gun, item no. 6220 or UBS spray gun, item no. 6219 with an operating pressure of 2 - 8 bar, depending on the desired spray pattern. Due to its