NOVOL PROFESSIONAL FINISH EASY SAND FINE BODY FILLER CAR FINISHING PUTTY

Description

NOVOL Professional
Sand Fine Body Filler
Car Finishing Putty
250g
Description:
- FINISH - the finishing putty is applied with a spatula.
- Serves for repairing small surfaces and final leveling of the surface before applying soils.
- Due to the small fillers it is ideally applied in thin layers and fills small depressions and scratches.
- It makes possible the processing of fine-grained sandpaper, resulting in a very smooth surface.
- It also has very good adhesion to different types of bases, including galvanized steel.
Can be used on the following types of surfaces:
- polyester laminates,
- steel,
- Cink Steel
- aluminum,
- two-component acrylic primers,
- old varnish coverings.
Attention:
- Do not directly apply to wash primers, single-component acrylic and nitrocellulose products.
Surface preparation:
- Surface of polyester laminate degrease, grind "dry" P80 - P120 and again degrease Wash to remove silicone;
- Degrease the steel surface, sand it using the "dry" method P80 - P120 and degrease again;
- Degrease the aluminum surface, matt with special material (eg Scotch Brite Fine, Scotch Brite Very Fine) and degrease again;
- degrease the galvanized surface, matt it with a special material (eg Scotch Brite Fine, Scotch Brite Very Fine) and degrease again;
- Ground degrease, sand off the method "dry" P220 - P280 and again degrease;
- the old lacquer coating should be degreased, sanded using the "dry" method P220 - P280 and degreased again.